NEC Express5800 Series Maintenance Manual page 182

Chapter 3 Appendix
Error
Class
code
Environment 24
Environment 25
Environment 26
Environment 27
Environment 28
Environment 29
Environment 2A
Environment 2B
Environment 2C
Environment 2D
Environment 2E
Environment 2F
Environment 30
Environment 31
Environment 32
Environment 33
182
Error message
External Chassis Fans Not Redundant
(Chassis %1, Location %2)
%1 Storage System Fans Not Redundant
(%2Slot %3, Location %4)
%1 Fans Not Redundant (Location %2, %3)
Critical Temperature Threshold Exceeded
Critical Temperature Threshold Exceeded
(Temperature Sensor %1, Location %2,
Temperature %3C %4)
External Chassis Overheating (Chassis %1,
Temperature Sensor %2, Location %3,
Temperature %4)
%1 Storage System Overheating (%2Slot %3,
Temperature Sensor %4, Location %5,
Temperature %6)
%1 Overheating (Temperature Sensor %2,
Location %3, Temperature %4, %5)
Temperature exceeded on PCIe disk %1.
Intrusion Alert Hardware installed.
#ILO had detected the removal of the Intrusion
Alert hardware.
Intrusion Alert Detection - The server chassis hood
is currently not installed.
The chassis hood has been replaced.
%1 Storage Enclosure Fan Failure (Fan %2,
Location %3, Box %4, %5)
%1 Storage Enclosure Overheating (Temperature
Sensor %2, Location %3, Box %4, %5)
Fan Degraded (Fan %1, Location %2)
Express5800/R120h-1E, R120h-2E Maintenance Guide
Action
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Check the ambient temperature where the unit
is being operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where the unit
is being operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where the
expansion chassis connected to the unit is
being operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where the %1
connected to the unit is being operated.
If the problem persists, contact your sales
representative.
Check the ambient temperature where the %1
connected to the unit is being operated.
If the problem persists, contact your sales
representative.
Contact your sales representative.
No additional action is required, if the applicable
HW has been added.
If the problem persists, contact your sales
representative.
No additional action is required, if the applicable
HW has been removed.
If the problem persists, contact your sales
representative.
The cover of the unit has been removed. Please
attach the cover.
If it is not a record of the intended operation, the
security of the unit may have been
compromised. Please take an appropriate
measure.
If the problem persists, contact your sales
representative.
It detected that the cover of the unit has been
removed.
If it is not a record of the intended operation, the
security of the unit may have been
compromised. Please take an appropriate
measure.
If the problem persists, contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
1. IML Error Message