NEC Express5800 Series Maintenance Manual page 215

Chapter 3 Appendix
(5) The list of messages about the rack infrastructure
Error
Class
code
Rack Infrastructure 1B
Rack Infrastructure 1C
Rack Infrastructure 1D
Rack Infrastructure 1E
Rack Infrastructure 1F
Rack Infrastructure 20
Rack Infrastructure 21
Rack Infrastructure 22
Rack Infrastructure 23
Rack Infrastructure 24
Rack Infrastructure 25
Rack Infrastructure 26
Rack Infrastructure 27
Rack Infrastructure 28
Rack Infrastructure 29
Rack Infrastructure 2A
Rack Infrastructure 2B
Rack Infrastructure 2C
Rack Infrastructure 2D
Rack Infrastructure 2E
Rack Infrastructure 2F
Rack Infrastructure 30
Error message
%1 Inadequate Power To Power On: %2
(Enclosure Serial Number %3, Bay %4)
%1 Inadequate Power To Power On: %2
(Enclosure Address %3, Slot %4)
%1 Rack Name Changed (Enclosure Serial
Number %2)
%1 Rack Name Changed (Enclosure
Address %2)
%1 Name Changed (Enclosure Serial
Number %2)
%1 Name Changed (Enclosure Address %2)
%1 Service Change (Enclosure Serial
Number %2)
%1 Service Change (Enclosure Address %2)
%1 Rack Name Conflict (Enclosure Serial
Number %2)
%1 Rack Name Conflict (Enclosure
Address %2)
%1 Rack Unique ID Changed (Enclosure
Serial Number %2)
%1 Rack Unique ID Changed (Enclosure
Address %2)
%1 LAN Settings Changed (Enclosure Serial
Number %2)
%1 LAN Settings Changed (Enclosure
Address %2)
%1 UID LED State Changed (Enclosure
Serial Number %2)
%1 UID LED State Changed (Enclosure
Address %2)
%1 Rack Infrastructure Changed (Enclosure
Serial Number %2, Type %3)
%1 Rack Infrastructure Changed (Enclosure
Address %2, Type %3)
Chassis Enclosure Serial Number %1
requires minimum firmware revision
0x%2.0x%3. It is currently 0x%4.0x%5.
Chassis Enclosure Address %1 requires
minimum firmware revision 0x%2.0x%3. It is
currently 0x%4.0x%5.
%1 Power Request Denied: %2 %3
(Enclosure Serial Number %4, Bay %5)
%1 Power Request Denied: %2 (Enclosure
Address %3, Slot %4)
Express5800/R120h-1E, R120h-2E Maintenance Guide
Action
Contact your sales representative.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Updating the firmware to the latest version can
resolve the problems. Update the firmware of
the enclosure whose serial number is %1. If the
problem persists, contact your sales
representative.
Updating the firmware to the latest version can
resolve the problems. Update the firmware of
the enclosure whose address is %1. If the
problem persists, contact your sales
representative.
Contact your sales representative.
Action is not necessary.
1. IML Error Message
215