NEC Express5800 Series Maintenance Manual page 211

Chapter 3 Appendix
Error
Class
code
UEFI 3011
UEFI 3012
UEFI 3013
UEFI 3016
UEFI 3017
UEFI 3018
UEFI 3019
Error message
MemBIST MEMTEST: UnCorrectable
Memory Error found at CPU %1 DIMM %2
Rank %3 - UC Count %4
MemBIST MEMTEST: Correctable Memory
Error found at CPU %1 DIMM %2 Rank %3
Strobe %4 - CE Count %5
Processor Built-In Self-Test (BIST) Failure.
Processor %1, Error Code = 0x%2.
Memory Configuration Error - No memory
is available. If DIMMs are installed, verify
that the DIMMs are installed properly.
-System Halted!
Server Platform Services Authentication
Failure - The Server Platform Services
(SPS) firmware image failed authentication
and may be compromised. -System Halted!
Server Platform Services Authentication
Failure - The Server Platform Services
(SPS) firmware image could not be
authenticated because the image is out of
date.
Server Platform Services Firmware in
Recovery Mode. SPS firmware image is
corrupted. -System Halted!
Express5800/R120h-1E, R120h-2E Maintenance Guide
Action
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Referring to the user's guide, change the mounting
positions or number of DIMM.
In case a problem is not resolved, contact your sales
representative.
Update the Server Platform Services (SPS) firmware. If
the problem persists, contact your sales representative.
Update the Server Platform Services (SPS) firmware. If
the problem persists, contact your sales representative.
Update the Server Platform Services (SPS) firmware. If
the problem persists, contact your sales representative.
1. IML Error Message
211