NEC Express5800 Series Maintenance Manual page 212

Chapter 3 Appendix
(4) The list of messages about the power supply
Error
Class
code
Power 15
Power 1B
Power 1C
Power 1E
Power 24
Power 28
Power 29
Power 2A
Power 2B
Power 2C
Power 2D
Power 2E
Power 2F
Power 30
Power 31
Power 32
Power 33
Power 34
Power 35
212
Error message
Mismatched Power Supply Installed
System Board Power Protection Fault
Power Supply or Power Backplane Detection
Error
Smart Storage Battery Removed (Battery %1)
Power On Denied (Service Information: %1)
System Power Supply: %1 (Power Supply %2)
External Chassis Power Supply: %1
(Chassis %2, Power Supply %3)
%1 Storage System Power Supply: %2
(%3Slot %4, Power Supply %5)
%1 Power Supply: %2 (Power Supply %3, %4)
System Power Supply Removed (Power
Supply %1)
External Chassis Power Supply Removed
(Chassis %1, Power Supply %2)
%1 Storage System Power Supply Removed
(Chassis %2 Slot %3, Power Supply %4)
%1 Power Supply Removed (Power
Supply %2, Enclosure Address %3)
%1 Power Supply Removed (Power
Supply %2, Enclosure Serial Number %3)
System Power Supply Inserted (Power
Supply %1)
External Chassis Power Supply Inserted
(Chassis %1, Power Supply %2)
%1 Storage System Power Supply Inserted
(Chassis %2 Slot %3, Power Supply %4)
%1 Power Supply Inserted (Power Supply %2,
Enclosure Address %3)
%1 Power Supply Inserted (Power Supply %2,
Enclosure Serial Number %3)
Express5800/R120h-1E, R120h-2E Maintenance Guide
Action
Confirm the PSU mounted on the unit.
If the problem persists, contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
Action is not necessary.
1. IML Error Message