NEC Express5800 Series Maintenance Manual page 86

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 2 Useful Features
(b) Legacy BIOS Boot Order Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > Legacy
BIOS Boot Order from the System Utilities, the Legacy BIOS Boot Order menu appears.
For details about the options, see the table below.
Option
Standard Boot Order(IPL)
Boot Controller Order
(6)
Network Options Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options from the
System Utilities, the Network Options menu appears.
For details about the options, see the table below.
Option
Network Boot Options
Pre-Boot Network Settings
iSCSI Configuration
VLAN Configuration
86
Parameter
-
-
Parameter
-
-
-
-
Express5800/R120h-1E, R120h-2E Maintenance Guide
Description
Use this option to configure the Legacy BIOS Boot
Order list. You can only configure this option if the
Boot Mode is configured to Legacy BIOS Mode.
Use this option to configure the Legacy BIOS Boot
Order list. You can only configure this option if the
Boot Mode is configured to Legacy BIOS Mode.
Description
Use this option to configure network boot settings,
such as enabling or disabling network boot for
embedded NICs, setting the network boot retry
support, or setting the PXE boot policy.
Use this option to configure the preboot network
settings such as the IPv4 address, the subnet
mask, the gateway, and the primary and secondary
DNS servers.
Select this option to display the iSCSI Configuration
menu. Use this menu to configure the iSCSI
Software Initiator settings to access remote targets.
In UEFI boot mode, these targets will appear as
bootable devices in the UEFI Boot Order. This
option is available only if Network Boot Options >
iSCSI Policy is set to Software Initiator.
Use this option to set the Global VLAN UEFI
configuration for all enabled network interfaces as
defined in the IEEE 802.1Q standard. This setting
applies to UEFI PXE boot, iSCSI Software Initiator
Boot, and UEFI HTTP Boot. It also applies to all
pre-boot network access from the UEFI Shell.
1. System Utilities

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120h-1eExpress5800/r120h-2eExp336Exp337

Table of Contents