Table of Contents
Advertisement
4.6
SWINGING
DO NOT SWING THE SUPERSTRUCTURE EXCEPT ON A SMOOTH, FIRM
AND LEVEL SURFACE, FREE OF OBSTRUCTIONS AND HOLES.
WHEN SWINGING, MAKE SURE THERE IS AMPLE ROOM FOR THE JIB
TO CLEAR SURROUNDING WALLS, PARTITIONS AND EQUIPMENT.
3
Figure 4-7. Swing Control
31210162
1
2
– JLG Lift –
SECTION 4 – MACHINE OPERATION
1. With all control levers in neutral position, squeeze and
hold the trigger switch (1) on front of the joystick.
2. Move the joystick to the desired direction: right (2) or
left (3). The speed of the movement is proportionally
controlled by the distance of travel of the joystick.
3. Return the controller to its centered (neutral) position to
stop, then release the trigger.
4-9
Advertisement
Table of Contents
