SECTION 2 – USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
Overload Sensor Check (if equipped)
Figure 2-3. Overload Sensor
31210162
Check the overload indicator light/alarm to ensure proper
operation. Wedge a block (P/N: ST2741 - located in the manual
storage container) to activate the overload sensor and keep it
activated. Refer to Figure 2-3.
1. From the Platform Control Console:
a. Confirm an audible alarm sounds.
b. Verify the overload indicator (Red) blinks.
c. Check that all functions are disabled.
2. From the Ground Control Panel:
a. Confirm an audible alarm sounds.
b. Verify the overload indicator (Red) blinks.
– JLG Lift –
2-9