Table of Contents
Advertisement
DO NOT RELEASE THE SWINGING MOTOR UNLESS THE MACHINE IS ON
A LEVEL SURFACE.
1. Remove the access door to the pump/motor assembly.
2. Fully unscrew the rotary valve (1).
3. Open the access cover to the operating hand wheel.
4. Turn the hand wheel clockwise to swing the structure to
the right or turn the hand wheel counter-clockwise to
swing the structure to the left.
5. When finished swinging, fully close the rotary valve,
close the access cover and reposition the access cover
to the pump/motor assembly.
31210162
SECTION 3 – MACHINE CONTROLS AND INDICATORS
Platform Control Station
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CON-
TROL LEVERS OR SWITCHES CONTROLLING PLATFORM MOVEMENT
DO NOT RETURN TO THE OFF OR NEUTRAL POSITION WHEN
RELEASED.
– JLG Lift –
3-9
Advertisement
Table of Contents
