DTC
FAULT MESSAGE
STEER SENSOR - DECOUPLED
8666
STEER SENSOR - NOT
8667
RESPONDING
STEER SENSOR - NOT
8668
CALIBRATED
8-7 Safety System Override
DTC
FAULT MESSAGE
MACHINE SAFETY SYSTEM
873
OVERRIDE OCCURED
31210162
SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
DESCRIPTION
Invalid signal from the steer sensor.
Invalid signal from the steer sensor.
The steering sensor has not been calibrated.
DESCRIPTION
Machine Safety System Override has been used
to override a Safety System or the Platform Oper-
ator station.
– JLG Lift –
CHECK
• Check the steer sensor for damage.
• Check that the steer sensor is securely mounted.
Refer problem to a qualified JLG mechanic.
• Check the steer sensor for damage.
• Check that the steer sensor is securely mounted.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
CHECK
• The record of the use of MSSO must be cleared.
Refer problem to a qualified JLG mechanic.
6-51