Lubrication; Wheel Torque Chart - JLG Toucan 8e Operation And Safety Manual

3. The tightening of the lug nuts should be done in stages.
Following the recommended sequence, tighten lug nut
per wheel torque.
Table 6-9. Wheel Torque Chart
Torque Sequence - Studs A
st
1 Stage
28-42 N.m 91-112 N.m
(20-30 ft.lbs) (65-80 ft.lbs)
Torque Sequence - Studs B
st
1 Stage
25-35 N.m
(18-25 ft.lbs) (51-61 ft.lbs)
4. Wheel lug nuts should be torqued after the first 50 hours
of operation and after each wheel removal. Check
torque every 3 month or 125 hours of operation.
31210162
SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
nd rd
2 Stage 3 Stage
142-163 N.m
(105-120 ft.lbs)
nd rd
2 Stage 3 Stage
70-84 N.m 120-140 N.m
(88-103 ft.lbs)
6.8

LUBRICATION

NOTE: Recommended lubricating intervals are based on
machine
machines used in multi-shift operations and/or exposed to
hostile environments or conditions, lubrication frequen-
cies must be increased accordingly.
– JLG Lift –
operation under normal conditions. For
6-21