Confirming The Registration Shift Setting In The Voice Display - Yamaha Electone STAGEA ELC-02 Owner's Manual

Confirming the Registration Shift
setting in the Voice Display
You can confirm the Registration Shift mode in the Voice
Display, Page 1.
Press the [VOICE DISPLAY] button on the panel to call
up the Voice Display.
The Registration Shift mode is shown at the bottom right
of the display.
Registration Shift, OFF:
The current Registration number is displayed.
Registration Shift, in "SHIFT" mode:
Current Registration
The current Registration number (left) and the next
number (right) are displayed.
Registration Shift, in "JUMP" mode:
Destination number can be changed.
The current Registration number (left) and the
destination number (right) will be displayed. You can
change the destination number even in the middle of the
performance by using the
display or the Data Control dial.
Registration Shift, in "USER" mode:
Indicates the current position of the Registration Shift.
You can change the Registration by moving the cursor (in
orange) right/left, using the displayed buttons or the Data
Control dial. This is handy if you've inadvertently
advanced the shift setting in the middle of your
performance. The user Registration settings cannot be
edited here.
Moves the cursor to the first position.
Moves the cursor one step to the left and selects
the next Registration.
Moves the cursor one step to the right and selects
the previous Registration.
Moves the cursor five steps to the right and
selects the Registration.
NOTE
The Registration shift display in the Voice display cannot be
interlocked with the Registration sequence.
ELC-02/ELCU-M02 Owner's Manual
Registration Shift
Next Registration
buttons in the
6
99