Controlling Rotary Speaker; Calling Up Another Page Of The Music Score; Controlling The Super Articulation Voices; Foot Pedal (Sold Separately) - Yamaha Electone STAGEA ELC-02 Owner's Manual

Foot Pedal (sold separately)

Controlling Rotary Speaker

You can control the Rotary Speaker effect (on/off ) by
using the Left Footswitch.
Reference page
• Rotary Speaker (page 47)
When the [Rotary Speaker] button is selected in this
display and you press the Footswitch, the Rotary Speaker
effect is switched on or off. This function corresponds to
the [ROTARY SP SPEED] button on the panel. To use
this function, you'll need to make the appropriate Rotary
Speaker settings for each Voice section or Organ Flute
Voice. For details, see page 47.
Calling up another page of the
music score
From the MDR display, you can call up another page of
the music score by using the Left Footswitch. For details,
see page 123.
Controlling the Super
Articulation Voices
By following the settings on page 43, you can control the
Super Articulation Voice (of which the name starts with
"S-") by using the Left Footswitch.
176 ELC-02/ELCU-M02 Owner's Manual
Foot Pedal (sold separately)
The Foot Pedal can be used to turn one of the following
on and off: Sustain effect, Melody On Chord function,
Lead Slide effect, or Solo function.
NOTE
• One or more functions can be assigned to the Foot Pedal
simultaneously. This enables you to use the Foot Pedal to instantly
turn on/off all assigned functions.
• The foot pedal which can be used is FC4A/FC5.
• Other than the above-mentioned functions, the foot pedal cannot
be assigned the functions.

Controlling Sustain

You can control the on/off status of sustain for the Upper
and Lower keyboards by using the Foot Pedal. Sustain for
the Pedalboard cannot be controlled.
1
Make sure that the Upper and/or Lower
Sustain buttons have been turned on.
Reference page
• Sustain (page 46)
2
Connect a Foot Pedal to the [FOOT
PEDAL] jack located on the rear of the
Electone.
Sustain is off in this status.
Reference page
• Connecting a Foot Pedal (page 186)
3
To apply sustain, press the Foot Pedal.
Sustain is constantly applied as long as the Foot
Pedal is pressed. Releasing the Foot Pedal turns
sustain off.
1 When the Foot Pedal is not
connected:
Sustain is applied constantly, as long as the front
panel Sustain buttons are on.
2 When the Foot Pedal is connected:
Sustain is canceled even if the front panel Sustain
buttons are on.