Yamaha Electone STAGEA ELC-02 Owner's Manual page 195

2
As necessary, set the detailed settings.
Wireless LAN mode
INFRASTRUCTURE DETAIL
mode (IP ADDRESS)
display
AD HOC mode DETAIL
(WIRELESS)
display
DETAIL
(IP ADDRESS)
display
INFRASTRUCTURE DETAIL (OTHER)
mode / AD HOC mode display
3
Save the settings.
Set the detailed settings, then press the [SAVE] button on the display. When the saving operation is completed, the
detailed settings display returns to the previous display.
Display Item
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
DNS SERVER 1
DNS SERVER 2
SSID
CHANNEL
SECURITY
PASSWORD
DHCP
IP ADDRESS
SUBNET MASK
HOST NAME
MAC ADDRESS
LAN DRIVER
VERSION
STATUS
Default setting
ON Determines whether or not DHCP is
used. If your router is compatible with
DHCP, select [ON] (set DNS
automatically) here.
Select on or off by pressing [ON] or
[OFF] button on the display.
0.0.0.0 Set the wireless LAN detailed settings.
IP Address, Subnet Mask, Gateway,
0.0.0.0
DNS Server1, DNS Server2 can be set
when DHCP is set to Off but cannot be
0.0.0.0
set when DHCP set to On. For details on
confirmation and changes in the setting
0.0.0.0
of the access point on the router side,
refer to the owner's manual for the
0.0.0.0
product you are using.
For details on how to enter characters,
refer to the instructions "Changing the
Song Name" on page 114. The setting
range is 0.0.0.0 – 255.255.255.255.
ap-(model name To find the specific MAC address, see
such as "ELC-02")- "MAC address" below.
(last 6 characters of
• SSID, Security and Password can be set
MAC address in
in the same way as those described in
lowercase); or simply
the section "Manual Setup" on
"ap-(model name)," if
page 192. The last 6 characters of the
MAC address cannot MAC address must be entered in
lowercase.
be used.
• Press the number button which appears
11
by pressing the [CHANNEL] button on
the display then, select the channel.
–
• DHCP and IP Address can be set in the
same way as those of
–
INFRASTRUCTURE mode in this table.
ON • The Subnet Mask value can be input in
the numerical input display, which is
192.168.0.1
called up by pressing the [SUBNET
MASK] button in the display.
255.255.255.0
(Model name such as Set the Host name. Up to 57 characters
"ELC-02")-(last 6 (half size) including alphanumeric
characters of MAC characters, the "_" (underscore) and "-"
address in (hyphen) character. For details on how
lowercase); or simply to enter characters, refer to the
"(model name)," if instructions "Changing the Song Name"
MAC address cannot on page 114. After entering the
be used. characters, press the [OK] button on the
display to finalize the setting.
The last 6 characters of the MAC
address must be entered in lowercase.
– Shows the MAC address of the USB
wireless LAN adaptor. You cannot
change the MAC address here.
– This only displays the version of the LAN
driver; the setting cannot be made.
00000000 Shows the error code of network
function. "00000000" means no error.
ELC-02/ELCU-M02 Owner's Manual
Connecting to an iPhone/iPad
Setting/Input
13
195