Yamaha Electone STAGEA ELC-02 Owner's Manual page 149

2 NOTE [L] [R] controls
Selects the previous/next position's note of the currently
selected instrument. In the notes below for example, you
can select notes 1, 3 and 4 one by one. Rests (2 and
5) are ignored.
1 2 3
3 QUANTIZE [L] [R] controls
Advances or reverses the rhythm clock by one step. The
size of a single step is determined by the Quantize value.
2
Change the accent level by using the
ACCENT buttons or Accent field.
The Accent field allows for finer changes.
2
1 Accent field
Touch on the box to enable the Accent field.
Turning the Data Control dial changes the accent level
over a range of 0 – 127.
The minimum setting results in no sound.
2 ACCENT buttons
Determines the coarse accent level. Eight accent levels
(from " " to " ") are available.
Press the desired Accent button to change the currently
selected note to the selected level.
4 5
1
To move an entered note:
1
Select the note you want to move (as in
step 1 on page 148).
2
Press the Rhythm Clock box to enable
the box.
3
Turn the Data Control dial to change the
position by one clock.
To change the length of an entered note:
The length of sustaining sounds such as Snare Roll and
Whistle can be changed by adjusting the Gate Time. See
page 154 for more information.
To erase an entered note:
1
Select the note you want to erase (as in
step 1 on page 148).
2
Press the [REST] button in the ACCENT
section of the display.
The selected note is deleted and replaced with a rest.
ELC-02/ELCU-M02 Owner's Manual
Rhythm Pattern Program
149
10