Table of Contents
Advertisement
4
Press the [SAVE] button.
A message appears, prompting confirmation of
overwriting the Registration Unit. Press
[OVERWRITE] to overwrite (replace), or press
[CANCEL] to abort the operation.
NOTE
Also with the following operations, only Registrations and other
data (excepting performance data) can be recorded.
1. Select the desired Song number to which you want to record.
2. Press the [I] (Record) button to set recording to standby.
3. Press the [R] (Play) button, then press the [J] (Stop) button
without playing the keyboard.
Changing the order of the
Registration Units
To call up another Registration Unit from the
Registration Shift (page 97) and Registration Sequence
(page 170) as the Next Unit, you should change the order
of the Registration Units as desired on the Unit Edit
display.
NOTE
The first Unit (located at the top) will be called up first after Song
playback starts.
1
From the SONG page, select a Song
which contains two or more
Registration Units.
For details on selecting a Song, see page 110.
2
Press the [UNIT EDIT] button in the
display to call up the Unit Edit display.
Saving Registrations and Other Data to a Unit
3
Change the order of the Registration
Units.
From the Registration Unit list at the left end in the
display, select the desired Unit then use the MOVE
buttons to move the order of the selected Unit.
1
2
1 Registration Unit list
Lists the Registration Units included in the current Song.
When the current Song contains five or more
Registration Units, the scroll button
to scroll through the Registration Unit list. The selected
Unit is highlighted in orange.
2 MOVE buttons
Moves the Registration Unit selected at 1 up or down
one by one.
3 DATA TO BE LOADED
When loading the Registration Unit selected at 1, use
these buttons to select only the desired data. For more
information, see page 118.
4 LOAD
Loads the Registration Unit selected at 1 according to
the settings of 3.
5 SAVE
Saves the Registration Memory data to the Registration
Unit selected at 1.
6 COPY
Creates the copy of the Registration Unit selected at 1,
and then locates the copied Unit at the bottom of the
Registration Unit list (1).
7 DELETE
Deletes the Registration Unit selected at 1.
4
Press the [CLOSE] button at the top
right in the display to close the Unit Edit
display.
ELC-02/ELCU-M02 Owner's Manual
4
5
6
7
3
can be used
117
7
Advertisement
Table of Contents
