Changing The Volume, Tempo And Pitch; Repeat Playback - Yamaha Electone STAGEA ELC-02 Owner's Manual

Hide thumbs Also See for Electone STAGEA ELC-02:
Table of Contents

Advertisement

Playing Back Audio Files
Changing the Volume, Tempo
and Pitch
You can change the volume, tempo and pitch of the audio
file as the file is playing.
1
Connect the compatible USB flash drive
to the [USB TO DEVICE] terminal.
Reference page
• Compatible USB flash drives (page 130)
2
Press the [AUDIO] button.
3
Select the desired audio file for
playback.
Since the operation for selecting audio files is the
same as that for Songs, refer to instruction steps 2
and 3 in "Selecting a Song" on page 110.
4
Press the
call up the Setting display.
134
ELC-02/ELCU-M02 Owner's Manual
(SETTING) button to
To adjust the Volume:
Touch the VOLUME slider in the display or use the
Data Control dial.
Range: 0 – 127
To change the Tempo:
Use the TEMPO
the Data Control dial to change the tempo. The
value can be adjusted from 75% to 125% and the
default value is 100%. Higher values result in a faster
tempo. If you press the TEMPO [RESET] button in
the display or select another audio file, this setting is
restored to the default value.
Range: 75% – 125%
To change the Pitch:
Use the PITCH
the Data Control dial to change the tempo. This lets
you shift the pitch of an audio file in semitone steps
(from -12 to 12). If you press the PITCH [RESET]
button in the display or select another audio file, this
setting is restored to the default value (0).
Range: -12 – +12
NOTE
• Changing the playback tempo or pitch of an audio file
may change its tonal characteristics.
• Volume, tempo and pitch changes are temporary; these
values revert to their defaults when the power is turned
off and then back on again.
5
Play back the audio file to hear and
check the changes you've made in the
Setting display.

Repeat playback

1
Press the REPEAT button as often as
necessary to select the desired repeat
mode.
Each press of the button switches among the modes.
(SINGLE)
Repeats the currently selected Song indefinitely.
(ALL)
Repeats all Songs in the currently selected folder in
order.
(RANDOM)
Repeats all Songs in the currently selected folder
randomly.
(OFF)
Cancels repeat playback.
2
Exit from the Setting display by
pressing the
the top right of the display.
3
Press the [R] (Play) button in the AUDIO
Page to begin repeat playback.
buttons in the display or
buttons in the display or
(FINISH) button at

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electone stagea elcu-m02

Table of Contents