Converting To El Format - Yamaha Electone STAGEA ELC-02 Owner's Manual

Other Functions (Tools)
4
Press the [CONVERT TO XG] button.
The following display appears.
5
(If necessary) Change the destination
for saving the converted Song.
For details on changing the destination, see
page 110.
6
Press the [EXECUTE] button.
A message appears indicating that the converted
data is being checked and the MDR starts playback
of the selected Song. When playback is finished, the
display returns to the previous display.
NOTE
Any playing of the keyboard or pressing of the panel
controls during the confirmation of the conversion will be
recorded to the converted XG-compatible Song.

Converting to EL format

Song data recorded via the ELS-01 series, ELS-02 series
and this Electone can be converted to EL series-
compatible data. The converted data in the USB flash
drive can be played back by EL-series instruments to
which the MDR-5 has already been installed. After
creating the folders named "F01" – "F99" on the root
directory in the USB flash drive, execute the instructions
below.
NOTE
Protected Songs cannot be converted.
Reference page
• About Protected Songs (page 119)
1
Select the Song to be converted to EL-
series format.
For details on selecting a Song, see page 110.
128 ELC-02/ELCU-M02 Owner's Manual
2
In the TOOLS Page, press the
[CONVERT] button.
A "Which do you want to select?" message appears.
3
Press the [CONVERT TO EL] button.
After the dialog appears, select the destination of the
converted data from F01 – F99.
4
Press the [EXECUTE] button in the
display.