Table of Contents
Advertisement
Settings Selected from the
Voice Condition Display
Choose a Voice on the panel, then press the same button
on the panel again (or press the name of the selected
Voice in the display). The Voice Condition display
appears.
Voice Condition display for each Voice has five pages that
can be switched by pressing [1] – [5] buttons at the top
right of the display.
Voice Condition [Page 1]
1
2
3
4
3 - 1 3 - 2 4 - 1
5
1
2
3
3 - 1
5
In this display, you can adjust the basic Voice controls,
including panning, touch tone and volume. The displays
of the various Voice sections have slight differences in
their functions.
1 Voice Link
Lets you register the settings on the Voice Condition
display (except for Volume and Brilliance) to the Voice
Link Category as a Voice. The registered Voice can be
selected from the "Voice Link" category on the display
called up via the User buttons of all the Voice Sections.
For detailed instructions, see page 48.
2 PAN
Determines the position of the Voice in the stereo image.
Seven pan positions are available.
6
7
8
9
6
7
8
)
Settings Selected from the Voice Condition Display
3 TOUCH TONE
The Touch Tone function gives you expressive control
over the volume and timbre of a Voice. All Voices are
provided with this expressive function, making it possible
to perfectly reproduce the subtle dynamic and tonal
changes of actual instruments.
Two types of keyboard touch affect this function: Initial
Touch and After Touch.
3 -1 INITIAL touch
Controls volume and timbre according to the
velocity at which you play the keys. The harder you
play the keys, the greater the volume and the
brighter the timbre will become.
Higher settings make the change wider. Minimum
setting produces no effect.
Range: 0 – 14
NOTE
Initial Touch may not be effective on some organ Voices.
3 -2 AFTER touch
Controls volume and timbre according to the
pressure you apply to the keys after playing them.
The harder you press down on the keys, the greater
the volume and the brighter the timbre will become.
Higher settings make the change wider. Minimum
setting produces no effect.
Range: 0 – 14
NOTE
• After Touch is not applied to the Pedal Voices.
• After Touch has no effect on percussive Voices (such as
piano or vibraphone), percussion sounds, or some organ
Voices.
4 PITCH
Controls pitch according to the playing style of
Horizontal Touch or After Touch. On some Voices in the
Lead Voice 2 section, not only pitch but also timbre may
be affected.
4 -1 AFTER touch
Controls the pitch according to the pressure you
apply to the keys after playing them.
The minimum setting produces no effect at all.
Higher (positive) settings make the pitch higher
according to the pressure and lower (negative)
settings make the pitch lower. The extreme settings
of +14 and -14 result in the widest pitch change.
Range: -14 – +14
ELC-02/ELCU-M02 Owner's Manual
4
41
Advertisement
Table of Contents
