Changing The Tempo; Repeat Playback - Yamaha Electone STAGEA ELC-02 Owner's Manual

Changing the tempo

You can change the tempo of the Song as the Song is
playing in the MDR display, either while the Song is
stopped or while it is playing.
NOTE
Only for Song data (recording of your performance) indicated
with the e mark can the tempo be changed during playback.
To change the tempo:
Use the TEMPO buttons in the display or the
Data Control dial to change the tempo. (The TEMPO
buttons on the panel cannot be used to change the tempo
for the Music Data Recorder.) The range is 50 – 200%.
The original recorded tempo is 100% and values less than
100% indicate slower tempo; values greater than 100%
indicate faster tempo.
To reset the changed tempo:
Use the TEMPO [RESET] button in the display to reset
the tempo to its original value (100%).

Repeat playback

This feature allows you to repeatedly play back either all
Songs in a folder or only one specific Song.
1
Select the Song you wish to play back.
If you wish to play back all Songs in a folder, select
the first Song that will be played back. For details on
selecting a Song, see page 110.
2
Press the [SONG] button at the top right
of the display to call up the SONG Page.
3
Press the (SETTINGS) button on
the panel to call up the Settings display.
4
Press the REPEAT button to select the
repeat mode.
Each press of the button switches among the modes.
ELC-02/ELCU-M02 Owner's Manual
Playing Back a Song
7
REPEAT button
121