Entering Percussion Sounds To A Rhythm Pattern - Step Write - Yamaha Electone STAGEA ELC-02 Owner's Manual

Entering percussion sounds to a
rhythm pattern — Step Write
You can enter percussion sounds in the INPUT Page of
the display. Before entering percussion sounds, turn off
the Upper and Lower keyboard Voices by setting each
Voice's volume to MIN.
NOTE
The volume of the percussion and accompaniment sound
during use of Rhythm Pattern Program can be controlled with
the VOLUME button of the RHYTHM section. When you quit
Rhythm Pattern Program, the VOLUME of the RHYTHM section
will return to the previous selected level.
1
Press the [INPUT] button at the top of
the display to call up the INPUT Page.
2
Select the part, MAIN DRUM or ADD
DRUM, to which you want to enter the
percussion.
In general, main (or basic) drum/percussion
instruments (such as Bass Drum, Snare Drum, and
so on) are entered in Main Drum part and others
(such as Tambourine, Triangle) are entered in Add
Drum part.
3
Select the desired Drum Kit.
You can select a kit from the two categories, Drum
Kit and SFX Kit. For details on each kit, see
page 160. Pressing the desired kit in the Kit list will
close the list, and then call up the selected kit to the
Upper and Lower keyboards.
Drum kit SFX kit
You can select only one kit for each part (Main
Drum or Add Drum). When you want to create a
rhythm pattern including two different drum kits,
select one kit for Main Drum and another for Add
Drum.
4
Select the percussion sound you wish
to enter by pressing the key on the
Upper or Lower keyboard that
corresponds to the sound.
The selected instrument's name appears on the
display.
Selected key
ELC-02/ELCU-M02 Owner's Manual
Rhythm Pattern Program
Instrument name
147
10