Yamaha Electone STAGEA ELC-02 Owner's Manual page 67

3
Press the [ASSIGN] button at the top
right in the display to call up the
ASSIGN Page.
4
Press the [KIT CHANGE] button at the
center of the display to call up the
Keyboard Percussion Kit List.
Press the kit name you want to use from the 38
Keyboard Percussion types. For details of percussion
assignments for each kit, see the Preset Keyboard
Percussion List on page 68.
The message "Are you sure you want to reset the
setup data to the default values?" appears when you
change the kit. Select [OK] to clear detailed settings
(made in the SETUP Page) and call up the selected kit
on the panel. Select [CANCEL] to call up the selected
kit without erasing the detailed settings.
5
Adjust the volume and amount of reverb
applied to the Keyboard Percussion.
Two sliders in the K.B.P. display determine the
reverb and volume settings. To adjust the volume
and amount of reverb, touch the slider in the display
or use the Data Control dial.
The settings here determine the reverb/volume for
the entire Keyboard Percussion setup, not for each
percussion instrument. You can, however, adjust
each percussion instrument's reverb/volume
(page 81).
6
Play some notes on the keyboards and/
or Pedalboard.
ELC-02/ELCU-M02 Owner's Manual
Keyboard Percussion
67
5