Yamaha Electone STAGEA ELC-02 Owner's Manual page 193

Connecting by the Ad Hoc Mode
1
Set the Wireless LAN mode to "Ad Hoc
Mode."
Refer to "Wireless LAN Mode. "
2
The settings for the instrument are
complete if you do not need to change
the SSID and so on. Connect the
iPhone/iPad to the instrument by
referring to the "For Electone users
iPhone/iPad Connection Manual."
You can change the SSID, Security, etc. from the
DETAIL display.
Reference page
• Wireless LAN Detailed Settings (page 194)
Wireless LAN Mode
1
Perform the same operation as in steps
1 – 3 in the "Displaying available
networks in the wireless LAN and
connecting to a network" instructions
on page 191.
2
Set the Wireless LAN mode.
You can set between two modes:
INFRASTRUCTURE and AD HOC. Press the
[MODE CHANGE] button on the display to call up
a message prompting confirmation of the operation,
then press the [OK] button to execute the operation.
Connecting to an iPhone/iPad
ELC-02/ELCU-M02 Owner's Manual
13
193