Yamaha Electone STAGEA ELC-02 Owner's Manual page 80

Keyboard Percussion
6
Assign an instrument to a particular key
or pedal by simultaneously holding
down the desired instrument name in
the display and pressing the key (or
pedal) to which the instrument is to be
assigned.
The key to which the instrument is to be assigned
Instrument Name
When the assignment is complete, the key name and
instrument name is displayed at the top of the
display. The assignments are saved to the User
memory selected in step 2 (in this example, User 1).
7
Repeat the operation steps above as
necessary to construct your own User
Keyboard Percussion set.
8
From the Menu page of Keyboard
Percussion, select the User number
which you wish to use for your
performance.
When you select "User 5" on the K.B.P. [1] page for
example, pressing the KEYBOARD PERCUSSION
[1] button will call up the User 5 of the Keyboard
Percussion.
NOTE
The User Keyboard Percussion data cannot be stored to
Registration Memory; only the on/off status of the [1]/[2]
buttons and which Keyboard Percussion kit (from Preset 1
– 2 and User 1 – 40) is selected can be stored there. When
you want to save the User Keyboard Percussion data
together with the current Registration Memory data,
execute the Save operation to the USB flash drive
(page 116). All 40 User Keyboard Percussion kits can be
saved for each Unit separately.
80 ELC-02/ELCU-M02 Owner's Manual
Hold down the Instrument
name...
Press the key.
To erase one instrument:
Simultaneously hold down the [CLEAR] button in the
display (ASSIGN Page) and press the key (or pedal)
corresponding to the instrument you wish to erase.
NOTICE
The Keyboard Percussion setting you have created is
automatically saved when you switch to another display.
While data is being saved, the square at the top left of the
display turns light blue for a few seconds. Do not turn the
power off while the Keyboard Percussion settings are being
saved.
To erase all instruments:
You can clear all assignments using the [CLEAR] button
in the display (ASSIGN Page).
1
Press, then release the [CLEAR] button.
The following display appears, prompting
confirmation of the operation.
2
Press [CLEAR] in the display to erase all
data. When [CLEAR] is selected, a
"Completed" message momentarily
appears on the display.
Press [CANCEL] in the display to abort the
operation.