Converting To Xg - Yamaha Electone STAGEA ELC-02 Owner's Manual

3
Press the [DELETE] button in the
display.
A message appears, prompting confirmation of the
operation.
Confirm that the Song to be deleted is shown in the
display. If you want to change the Song, press the
[CANCEL] button and select the desired Song.
4
Press the button of the specific data you
want to delete ("DELETE ALL,"
"DELETE REGIST" or "DELETE
PERFORMANCE"). The selected data
will be deleted.
• DELETE ALL: Deletes the entire Song.
• DELETE REGIST: Deletes only Registration
data in the Song.
• DELETE PERFORMANCE: Deletes only
performance data in the Song.
Pressing [CANCEL] aborts the operation.
When deleting folders, Songs with only
registration, Songs with only
performance data, Protected Songs or
XG-compatible Songs:
Select [DELETE] to actually delete the data, or select
[CANCEL] to abort the operation.

Converting to XG

Song data recorded on this Electone can be converted to
XG-compatible data which can be played back by XG-
compatible devices. Before executing the conversion,
confirm that the USB flash drive contains enough
amount of available memory.
NOTE
• The converted XG Song data may sound differently from the
original data.
• Protected Songs cannot be converted.
1
Select a Song to be converted to XG.
For details on selecting a Song, see page 110.
2
Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.
3
Press the [CONVERT] button.
A "Which do you want to select?" message appears.
ELC-02/ELCU-M02 Owner's Manual
Other Functions (Tools)
127
7