Apax-5435 Apax Idoor Expansion Module - Advantech APAX-5000 Series User Manual

4.2

APAX-5435 APAX iDoor Expansion module

The APAX-5435 is equipped with one mini PCI express, which can support Advan-
tech iDoor module to expand 5580 interface, including filedbus and wireless commu-
nication. It is fully integrated with the APAX-5580 series. The integrated system is an
intelligent standalone system and can connect and issue commands to control
devices such as printers and PLCs in remote factory location.
Specifications
Module Interface
 Mini PCIEPCIE 2.0
 mSATA
 Supports SATA GENI/GENII/GENIII
Environment
 Operating Temperature: -10 ~ 60°C (when mounted vertically)
Relative Humidity: 5 ~ 95%

Storage Temperature: -40 ~ 85°C (non-condensing)

Supported iDoor Modules
PCM-26D2CA

PCM-26D1DB

 PCM-26R2PN
 PCM-26R2EC
 PCM-26R2EI
 PCM-24S2WF
 PCM-24S33G
 PCM-24R2GL
 PCM-24R2PE
 PCM-24R1TP
 PCM-23U1DG
 PCM-2300MR
Note!
Make sure the system is powered off when you want to setup the APAX‐
5435 with APAX‐5580. The APAX‐5435 doesn't support hot swap.
Configuration Settings
SW2
SW2
APAX-5000 I/O Series User Manual
SJA1000 CANBUS, CANOpen, DB9
1-Port Hilscher netX100 FieldBus mPCIe, ProfiBus,
DB9
2-Port Hilscher netX100 FieldBus mPCIe, PROFINET,
RJ45
2-Port Hilscher netX100 FieldBus mPCIe, EtherCAT,
RJ45
2-Port Hilscher netX100 FieldBus mPCIe, EtherNet/IP,
RJ45
Wi-Fi 802.11 a/b/g/n 2T2R w/ Bluetooth4.0, Half-size
mPCIe, 2-port SMA
Wide-Temp 3.75G HSPA and GPS, 2-in-1, Full-size
mPCIe w/ dual SIM Card holder, Antenna, cable
2-port GbE BaseT(X) 10/100/1000 Mbps, mPCIe Card
GbE, IEEE 802.3af (PoE) Compliant, mPCIe, RJ45 x2
®
Intel 82574L, GbE, RJ45 x 1
USB Slot w/ Lock for USB Dongle, Half-size mPCIe
MRAM, 2 MByte
mPCIe Mode(default)
PIN1 ON
PIN2 ON
106
SATA Mode
ON
OFF