Mechanical Assembly And Power Connection; Wiring Power Input To The Backplane - Advantech APAX-5000 Series User Manual

1.7

Mechanical Assembly and Power Connection

1.7.1

Wiring Power Input to the Backplane

There are two ways that APAX-5000 I/O mdoules can be powered. One is to connect
the DC power supply wire directly to the power connector on the backplane. Another
way is using APAX-5343E power supply module.
When you wire the power supply to the backplane, the power is transferred between
backplanes, and provides to all APAX-5000 I/O modules inserted on the backplanes.
Refer to figures below for how to wiring the power to the backplane, and how to
assembly APAX-5000 I/O modules with backplanes:
1. Connect the power supply wire to the power connectors on the 2-slot APAX-
5002 backplane module.
Warning! If you use APAX-5000 digital modules in the same system, use different
power supplies for the system and the the digital channels on the mod-
ules to ensure isolation protection between digital channels and system.
2. Insert one APAX-5000 I/O module on that APAX-5002 backplane module.
APAX-5000 I/O Series User Manual 10