Introduction To Amax-5000 Slice I/O Module - Advantech AMAX-5000 Series User Manual

1.1

Introduction to AMAX-5000 slice I/O module

This manual will only introduce the AMAX-5000 series slice I/O modules. To know
more about AMAX-5580 controller and AMAX-5400 series extension modules,
please download AMAX-5580 user manual from our website.
Advantech provides different I/O modules for various applications. The following
table outlines Advantech's supported I/O modules.
Table 1.1: Table 1.1: AMAX-5000 series extension modules
Module
Power
Analog I/O
AMAX-5000 Series User Manual
Name Specifications
Power Input Module
- 24V
DC
- Abnormal Voltage detection
- 4DI / Wet Contact
AMAX-5001
* This should be the first module to start the right
hand-side slice IO after AMAX-5580. It can also
be added between AMAX-50XX modules to pro-
vide extra power.
4-Ch RTD Input module
- 2 or 3 wire RTD sensor
AMAX-5015
- Pt100, Pt1000, Balco500, Ni518
- 100Hz sample rate per channel
6-Ch Voltage Input Module
- Voltage Input
AMAX-5017V
- 16-bit resolution
- 100Hz sample rate per channel
6-Ch Current Input Module
- Current Input
AMAX-5017C - 16-bit resolution
- 100Hz sample rate per channel
- Support wire burn-out detection
6-Ch Thermocouple Input Module
- Support J/K/T/E/R/S/B type
AMAX-5018 - 16-bit resolution
- 100Hz sample rate per channel
- Support wire burn-out detection
4-Ch Analogue Output Module
- Voltage and Current
AMAX-5024
- 16-bit resolution
- Fail-safe value output
2
power input for Slice IO*