Mounting; Din-Rail Mounting - Advantech APAX-5000 Series User Manual

2. Detach APAX-5000 I/O module from the backplane.
Repeat Step 1 ~ Step 2 for all the APAX-5000 I/O modules you want to remove.
It is the similar when you insert APAX-5000 I/O modules back to the backplane. First,
insert APAX-5000 I/O module to backplane. Then, pull down the two module locks to
lock on the backplane, and APAX-5000 I/O module will be power-on and can be
used.
The device must be fully dismantled in order to dispose of it. Electronic parts must be
disposed of in accordance with national electronics scrap regulations.
1.9

Mounting

1.9.1

DIN-rail Mounting

APAX-5000 I/O module can be mounted through backplane to the following DIN rails:
35 x 7.5 mm or 35 x 15 mm. Below are the procedures for the DIN rails mounting.
1. Pull down the DIN rail lock at the back of APAX-5002 backplane.
APAX-5000 I/O Series User Manual 18