Power; I/O Specifications; Wise-S614 I/O Module - Advantech WISE-4610 User Manual

3.4

Power

 Power Input Voltage: 10 ~ 50 V
 Power Consumption:
– WISE-4610: 11 W @ 24 V, when the battery is charging
– WISE-S614: 1.9 W @ 24 V
– WISE-S672: 0.3W@24V
Solar Panel Input Voltage: 15 ~ 50 V

 Battery Capacity: 4000 mA
 Battery Life: 6 months (with hourly data updates and daily GPS updates)
Note! The battery life is estimated for temperatures of 25 °C. Operation in low-
temperature environments will reduce the battery life.
3.5

I/O Specifications

 Power Connector: 1 x M12 4-pin code-A male connector with male pins
 I/O Connector: 2 x M12 8-pin code-D female connector with female pins
3.5.1

WISE-S614 I/O Module

3.5.1.1 Digital Inputs
 Channels: 4
 Logic Level (Dry Contact):
– 0: Open
– 1: Close DI COM
 Non-isolation
 Supports 200 Hz counter input (32-bit + 1-bit overflow)
 Keep/discard counter value when power OFF
 Supports 200 Hz Frequency Input
 Supports inverted DI status
3.5.1.2 Analog Inputs
Channels: 4

 Resolution: 16 bit
 Sampling Rate: 1 Hz per channel
 Accuracy:
– ±0.1% of FSR (voltage)
– ±0.2% of FSR (current)
 Input Range:
 ±150mV, ±500mV, ±1 V, ±5V, ±10V, 0 ~ 150mV, 0 ~ 500mV, 0 ~ 1V, 0 ~ 5V, 0 ~
10V, 0 ~ 20mA, 4 ~ 20mA, ±20mA
 Input Impedance:
– > 2M Ω (voltage)
– 240 Ω (external resistor for current)
 Isolation Voltage: 3000 V
 Common Mode Voltage: 350 V
 Burn-Out Detection: Yes (4 ~ 20mA only)
WISE-4610 User Manual
DC
DC
DC
DC
DC
DC
18