Advantech APAX-5000 Series User Manual page 63

APAX-5060 Specifications
Relay Output
 Channels: 12
 Relay Type: Form A (SPST)
Switching Capacity and Lifetime of the Contact (For Resistive Load)

– VDE: 30,000 operations (5 A @ 250 VAC, 10 operations/minute at 8 C)
70,000 operations (5 A @ 30 VDC, 10 operations/ minute at 85 C)
– UL: 60,000 operations (5 A @ 250 VAC)
100,000 operations (5 A @ 30 VDC)
– Mechanism: 20,000,000 operations (no load, 300 operations/minute)
 Breakdown Voltage: 500 VAC (50/60 Hz)
 Contact Resistance: 30 m (maximum)
 Insulation Resistance: 1 G (minimum) at 500 VDC
 Operating Time: 10 ms maximum at rated voltage (excluding bounce time)
 Release Time: 5 ms maximum at rated voltage (excluding bounce time)
Protection
 Isolation: 2,500 VDC (Between channels and backplane bus)
 Fail Safe Protection*
* When I/O module lose its communication with controller or coupler, the output chan-
nel will generate a pre-defined value
Environment
Operating Temperature: -10 ~ 60 C (when mounted vertically)

Storage Temperature: -40 ~ 70 C

 Relative Humidity: 5 ~ 95% (non-condensing)
General
Dimensions (W x H x D): 30 x 139 x 100 mm

Weight: 195 g

 Power Consumption: 2 W @ 24 VDC (typical)
 Status Display: LED per channel
– On: Logic level "1"
– Off: Logic level "0"
55 APAX-5000 I/O Series User Manual