Advantech APAX-5000 Series User Manual page 41

Application Wiring
Note! You can use the jumpers to configure each analog input channel type
(voltage/thermocouple or current). Refer to Section 1.5 for the location
of the jumpers. There are a total of 12 jumpers and each is specific for
one channel.
APAX-5018 Specifications
 Channels: 12 (Differential)
 Input Type: V, mV, mA, Thermocouple
 Voltage/Current Range:
±50mV, ±100mV, ±500mV, ±1V, ±2.5V, ±20mA, 0~20mA, 4~20 mA
 Voltage and Current Accuracy: ±0.1% or better (Voltage), ±0.2% or better
(Current) at 25 C
 Temperature Range and Accuracy:
Type Range
Type J -210 ~ -150 ° C
-150 ~ 1200 ° C
Type K -230 ~ -150 ° C
-150 ~ 1372 ° C
Type T -230 ~ -150 ° C
-150 ~ 400 ° C
Type E -230 ~ -150 ° C
-150 ~ 1000 ° C
Type R 0 ~ 100 ° C
100 ~ 1768 ° C
Type S 0 ~ 100 ° C
100 ~ 1768 ° C
Type B 200 ~ 400 ° C
400 ~ 1820 ° C
Figure 2.8 Wiring for APAX-5018
Accuracy
±2.5 ° C
±2 ° C
±4 ° C
±2.5° C
±2° C
±1.5 ° C
±2.5 ° C
±2 ° C
±2.5° C
±2 ° C
±2.5 ° C
±2 ° C
±4 ° C
±3 ° C
33 APAX-5000 I/O Series User Manual