Using The Apax-5343E Power Supply Module - Advantech APAX-5000 Series User Manual

1.7.2

Using the APAX-5343E Power Supply Module

APAX-5000 I/O modules can also be powered by the APAX-5343E power supply
module, connected to the left side of the whole system. The power can be transferred
to APAX-5000 I/O modules though the backplanes.
Note! Refer to Chapter 5 for APAX-5343E specifications.
1. Follow the procedure described in Section 1.7.1 to assembly APAX-5000 I/O
modules into one complete system. The only difference is that you don't need to
connect the power supply wiring to the power connectors on the backplane
(step 1 in Section 1.7.1).
2. Pull up the module locks on the upper case of one APAX-5343E. Then you can
separate the upper case of APAX-5343E from its backplane.
APAX-5000 I/O Series User Manual 14