Figure 3-44 Spot Monitor Screen; Figure 3-45 Remote Control Setup Screen - Honeywell HRSD8 User Manual

Configuration
2.
3.
4.
Save your Display settings by highlighting Save and pressing
exit the screen without saving the changes.
Remote Control Screen
With the Remote Control Setup screen, you can select a port and make correct settings
for a remote keyboard.
1.
72
Figure 3-44 Spot Monitor Screen
Highlight the field in the Channels column and press
Channels screen appears.
Select the cameras you want in the sequence by using the UP and DOWN arrows
to scroll through the list. Press
Select the Dwell time by highlighting that field and pressing
from 1 to 20 seconds.
Highlight Remote Control in the Devices menu and press
Figure 3-45 Remote Control Setup Screen
to toggle the cameras On and Off.
. The Spot Monitor 1:
. You can select
. Select Cancel to
.