Set Custom Suffix - Newland NLS-HR1050-7 Series User Manual

Set Custom Suffix

To set a custom suffix, scan the Set Custom Suffix barcode, the numeric barcodes corresponding to the
hexadecimal value of a desired suffix and the Save barcode.
Note: A custom suffix cannot exceed 5 characters.
Example: Set the custom suffix to "AGE" (its hexadecimal value is 0x41/0x47/0x45)
1. Scan the Enter Setup barcode.
2. Scan the Set Custom Suffix barcode.
Scan the numeric barcodes "4""1""4""7""4" and "5". (See the Digit Barcodes section in Appendix)
3.
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Enable Custom Suffix barcode.
6. Scan the Exit Setup barcode.
89
Set Custom Suffix
** Enter Setup
Exit Setup