Custom Suffix; Enable/Disable Custom Suffix; Set Custom Suffix - Newland NLS-FR40 User Manual

Custom Suffix

Enable/Disable Custom Suffix

If custom suffix is enabled, you are allowed to append after the scanned data a user-defined suffix that cannot exceed 10
characters.
For example, if the custom suffix is "AB" and the scanned data is "123", the Host will receive "123AB".
**【Disable Custom Suffix】

Set Custom Suffix

To set a custom suffix, scan the Set Custom Suffix barcode, the numeric barcodes corresponding to the hexadecimal
value of a desired suffix and the Save barcode.
Note: A custom suffix cannot exceed 10 characters.
Set the custom suffix to "CODE" (its hexadecimal value is 0x43/0x4F/0x44/0x45):
1.
2.
3.
4.
5.
6.
117
【Set Custom Suffix】
Scan the Enter Setup barcode.
Scan the Set Custom Suffix barcode.
Scan the numeric barcodes "4","3","4","F","4","4","4" and "5".
Scan the Save barcode.
Scan the Enable Custom Suffix barcode.
Scan the Exit Setup barcode.
【Enter Setup】
【Enable Custom Suffix】
**【Exit Setup】