Use PS/2 Cable (Hardware Version: V2 or higher)
Connect HR1050 scanner to a Host through a PS/2 cable with RJ45 and PS/2 connectors and a power
jack:
1.
Plug the RJ45 connector into the data slot (see Fig.1-1) on the scanner.
2.
Plug the PS/2 connector into the PS/2 port on the Host.
3.
When required, plug the power adapter into the power jack on the PS/2 cable.
4.
When required, connect the PS/2 cable to a keyboard via its PS/2 port.
Fig. 1-5
6