Use Usb Cable; Use Rs-232 Cable - Newland NLS-HR1050-7 Series User Manual

Use USB Cable

Connect HR1050 scanner to a Host through a USB cable with RJ45 and USB connectors:
1. Plug the RJ45 connector into the cable slot (see Fig.1-1) on the scanner.
Plug the USB connector into the USB port on the Host.
2.

Use RS-232 Cable

Connect HR1050 scanner to a Host through an RS-232 cable with RJ45/RS-232 connectors and a power
jack:
1. Plug the RJ45 connector into the cable slot (see Fig.1-1) on the scanner.
2. Plug the RS-232 connector into the RS-232 port on the Host.
3. Plug the power adapter into the power jack on the RS-232 cable.
5
Fig. 1-3
Fig. 1-4