Custom Suffix
Enable/Disable Custom Suffix
If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed
11 characters.
Enable Custom Suffix
Set Custom Suffix
To set a custom suffix, scan the Set Custom Suffix barcode and the numeric barcodes representing the
hexadecimal value(s) of a desired prefix and then scan the Save barcode. Refer to Appendix 4: ASCII
Table for hexadecimal values of characters. To view a setting example, see Appendix 5: Parameter
Programming Examples.
Note: A custom prefix cannot exceed 11 characters.
47
Set Custom Suffix
Enter Setup
**
Disable Custom Suffix
** Exit Setup