Custom Suffix; Enable/Disable Custom Suffix; Set Custom Suffix - Newland HR3260-CS User Manual

【Enter Setup】

Custom Suffix

Enable/Disable Custom Suffix

If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed
10 characters. For example, if the custom suffix is "AB" and the barcode data is "123", the Host will
receive "123AB".
**【Disable Custom Suffix】

Set Custom Suffix

To set a custom suffix, scan the Set Custom Suffix barcode and then the numeric barcodes
corresponding to the hexadecimal value of a desired suffix. To save the settings, scan the Save barcode.
Note: A custom suffix cannot exceed 10 characters.
Set the custom suffix to "CODE" (its hexadecimal value is 0x43/0x4F/0x44/0x45):
1.
2.
3.
4.
5.
6.
**【Exit Setup】
【Set Custom Suffix】
Scan the Enter Setup barcode.
Scan the Set Custom Suffix barcode.
Scan the numeric barcodes "4","3","4","F","4","4","4" and "5". (See the Digit
Barcodes in Appendix)
Scan the Save barcode. (See the Save/Cancel Barcodes in Appendix)
Scan the Enable Custom Suffix barcode.
Scan the Exit Setup barcode.
【Enable Custom Suffix】
130