Introduction
This manual provides detailed instructions for setting up and using the NLS-HR1050-7X hand-held
barcode scanner (hereinafter referred to as "HR1050 scanner" or "the scanner").
Chapter Description
Chapter 1, Getting Started
Chapter 2, System Settings
Chapter 3, Communication Settings : This chapter describes how to configure RS-232 and USB
Chapter 4, Prefix & Suffix
Chapter 5, Symbologies
Appendix
1
Preface
: This chapter gives a general description of HR1050 scanner
including its technical parameters.
: This chapter introduces two methods to configure the HR1050
scanner: barcode programming and command programming.
parameters.
: This chapter describes how to use prefix and suffix to
customize scanned data.
: This chapter lists all compatible symbologies and describes
how to configure the relevant parameters.
: This chapter offers factory defaults table and a bunch of
frequently used programming barcodes.