Table of Contents
Advertisement
6. SPECIFICATIONS
6.1 Line Mode Specifications
Rated Power
Power factor
Nominal battery voltage
Utility Voltage Waveform
Utility qualify time setting
Nominal Input Voltage
AVR function
Utility voltage range
Nominal Input Frequency
Default frequency
Utility frequency range
Transfer Time
Overload Protection
Output short circuit
Site fault detection
Efficiency (Line mode)
Efficiency (AVR mode)
External PTS power capacity
External PTS
Sinusoidal (utility or generator)
3/10/30 seconds adjustable,
88 ~152 Vac or 176 ~ 300Vac user programmable.
Defaults set @ 100 ~ 130Vac or 200 ~ 260Vac
50Hz / 60Hz (Auto detection, 55Hz as boundary)
47 ~ 53 Hz(50Hz mode) / 57 ~ 63Hz(60Hz mode)
Normal mode
UPS without PTS
Generator mode
UPS with PTS
5s@≥125 ~150% load; 60s@110%~125% load
When UPS is good, the PTS allows UPS output to flow out to the outdoor
cabinet
If the UPS is not functioning, the PTS will bypass the UPS allowing the
utility to flow out to the outdoor cabinet.
29
2000VA/1600W
0.8
48Vdc
120Vac or 230/240Vac
Enable/ Disable
Last utility frequency
40ms maximum
Input/Output Breaker
Yes
95%
90%
30A
12ms maximum
25ms maximum
Advertisement
Table of Contents
