Appendix 1.5.4 Cc-Link Ie Field Parameter Setup - Panasonic SC-HG1 Series Reference Manual

Appendix 1.5.4 CC-Link IE Field parameter setup
Open GX Works3 to configure these settings.
Use the following steps to create PLC configuration data and then configure the CC-Link IE Field slaves.
(1) Creating a new project (common)
[Project] → [New]
Enter the series, type, and program language as shown in figure 1.5.4-1.
Change the model name depending on the actual system configuration.
Figure 1.5.4-1: Parameter settings ([New])
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
WUME-SCHG1IQRFB-1
144/184