Panasonic SC-HG1 Series Reference Manual page 168

(3) Program
■ Common settings
Label name
CC-Link IE Field flag
Start I/O No.
Station No.
(a) P+SUNX-SC-HG1_InitializeUnit_R (initialization)
When M0 is turned ON, this FB initializes the SC-HG1-C with its station number set to 1.
(b) P+SUNX-SC-HG1_ClearError_R (error clear)
When M0 is turned ON, this FB clears the error of the SC-HG1-C with its station number set to 1.
Setting values
OFF
H0
K1
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Turn OFF this flag when you run this FB on an
SC-HG1-C connected to the CC-Link master/local
module.
Specify the Start XY address of the RJ71EN71 to
communicate with.
Specify the station number of the communication unit
you want to operate.
168/184
Description
WUME-SCHG1IQRFB-1