Appendix 1.5. Various Settings; Appendix 1.5.1 Cc-Link Communication Unit Setup - Panasonic SC-HG1 Series Reference Manual

Appendix 1.5. Various settings
Appendix 1.5.1 CC-Link communication unit setup
To connect the communication unit to the CC-Link network, set the station number, the baud rate, and the CC-Link
operation mode.
Set the baud rate setting switch with reference to the following table.
Before turning on the power, set the CC-Link operating mode, using the mode setting switch.
Baud Rate Setting Switch
0
1
2
3
4
Figure 1.5.1-1: SC-HG1-C hardware setup
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Baud Rate
156kbps
6.25kbps
2.5Mbps
5Mbps
10Mbps
136/184
WUME-SCHG1IQRFB-1