Panasonic SC-HG1 Series Reference Manual page 33

Item
Description of
functions
FB compilation
method
FB behavior
i_bEN input condition
When i_bEN (Execution Command) is turned ON, this FB executes the command input to Input
Command (i_uCommand).
If Read Flag (i_bReadFlag) is OFF, the command is written to the controller specified by Set
Controller (i_uSetController).
If All Controller Set (i_bAllSetRequest) is ON at this time, the value input to Set Controller
(i_uSetController) is ignored and the command is written to and executed on all the connected
controllers.
To execute writing, input the written data to Command Data (i_dCommandData).
If Read Flag (i_bReadFlag) is ON, the value input to Set Controller (i_uSetController) is ignored
and the command is read from and executed on all the connected controllers regardless of whether
All Controller Set (i_bAllSetRequest) is ON or OFF.
The result of reading is output to Command Response (o_d15CommandResponse).
Macro type
Pulse execution type (multi-scan execution type)
None
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Description
33/184
WUME-SCHG1IQRFB-1