I Manual Recording Setup (Rec Setup); I Externally Specified Recording Mode (Ext Rec Setup); I Display Setup (Display Setup) - Panasonic WJ-HD220 Operating Instructions Manual

Digital disk recorder
Hide thumbs Also See for WJ-HD220:
Table of Contents

Advertisement

3. Select the parameter with the JogDial, and press the
JogDial.
The default is REC.
REC: The channel is recorded in alarm recording, timer
recording and manual recording mode.
ALM-ONLY: The channel is recorded only when the
alarm operates.
4. Repeat steps 2 and 3 until all channels are set.
5. Press the [SETUP/ESC] button to return to the PROG1
SETUP, NO. 1 menu.
I Manual Recording Setup (REC
SETUP)
The WJ-HD220 will record image and audio data either with
or without timer restrictions. Manual recording is available
when OFF is selected for TIMER in WJ-HD220 MAIN MENU;
the timer schedule does not apply. Alarm recording will
also be carried out with parameters specified in this menu.
REC SETUP
REC MODE
SF-24H
REC RATE
30FPS
REC QUALITY
SUPER FINE
ALM REC MODE
SF-24H
REC RATE
30FPS
REC QUALITY
SUPER FINE
PRE ALM REC
0S
POST ALM REC
10S
DYNAMIC REC
OFF
TRIGGER ACTION SETUPO
CAM REC SETUPO
Refer to G Recording Mode Setup PROG1-4 SETUP, NO. 1-
4 for operating procedures and available parameters.
I Externally Specified Recording
Mode (EXT REC SETUP)
This setting allows changing the recording mode from the
ongoing one to an optional one specified here when turning
on the switch connected externally to the EXT REC terminal.
1. Move the cursor to EXT REC MODE with the [D] or [C]
button.
2. Select the desired mode with the JogDial, and press
the JogDial.
Refer to page 26 for the recording mode parameters.
3. Press the [SETUP/ESC] button to return to WJ-HD220
MAIN MENU.

I Display Setup (DISPLAY SETUP)

You can program the display of information on the monitor,
such as clock, time and date, and so forth.
DISPLAY SETUP
CLOCK→ JAN15.04
11:05
TIME&DATE DISP.TYPE1 24H
TIME&DATE POSI.R-LOWER
TIME&DATE EMB. OFF
STATUS DISP.
ON
STATUS POSI.
R-LOWER
HDD FULL
1%
REMOTE LED
ON
HDD CHECK
0:00
CAMERA TITLEO
G Clock (CLOCK)
1. Press the JogDial (SET) to move the cursor to the
desired position.
2. Rotate the JogDial clockwise to increase the parameter,
or counter-clockwise to decrease. The positions indi-
cate the year, month, day, hour, and minute respective-
ly.
The default is "JAN 01. 04 0:00".
MMM DD. YY HH:MM
3. Press the JogDial (SET) to validate the selection.
4. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
G Time & Date (TIME&DATE DISP.)
1. Select a display type with the JogDial.
The default is TYPE1 24H.
TYPE1 24H: Time and date are displayed in one line in
the 24-hour system.
TYPE1 12H: Time and date are displayed in one line in
the AM-PM system.
TYPE2 24H: Time and date are displayed in two lines in
the 24-hour system.
TYPE2 12H: Time and date are displayed in two lines in
the AM-PM system.
OFF: Does not display time and date.
JAN15.04
20:00:00
TYPE1
JAN15.04
20:00:00
TYPE2
Page 28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents