Table of Contents
Advertisement
4.7.2. Link Aggregation
4.7.2.a. About Link aggregation
Link aggregation is a function that is possible to increase redundancy of
network paths and bandwidth between Switching Hubs by grouping
multiple ports to a trunk for connection.
In this Switching Hub, up to 8 ports can be assigned to 1 group, and 4
groups can be created.
When using both Link Aggregation and Access Control functions, assign a
practical physical port number to a port list of access control, not a logical
port created in Link Aggregation. For details, refer to 4.7.4.
Note: If port communication modes are mixed, Link Aggregation cannot be
configured. In addition, Link Aggregation and Internet Mansion
mode cannot be used simultaneously.
Note: Depending on number of ports in a group or the traffic condition,
traffic may not be assigned uniformly to all the ports.
126
Advertisement
Table of Contents
