Table of Contents
Advertisement
1.4.3.
Identifying the starting device
A starting device is configured for each CC-Link or CC-Link IE Field master/local module. Check the link refresh setting
configured for the CC-Link or CC-Link IE Field master/local module connected to the communication unit where you
want to run the FB.
Navigation window → Parameter → Module information → (Destination CC-Link / CC-Link IE Field master)
1.5.
Related manuals
MELSEC iQ-R CPU Module User's Manual (Startup)
MELSEC iQ-R CPU Module User's Manual (Application)
MELSEC iQ-R CC-Link System Master/Local Module User's Manual (Startup)
MELSEC iQ-R CC-Link System Master/Local Module User's Manual (Application)
MELSEC iQ-R Ethernet/CC-Link IE User's Manual (Startup)
MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
MELSEC iQ-R Programming Manual (CPU Module Instructions, Standard Functions/Function Blocks)
GX Works3 Operating Manual
CC-Link Communication Unit for Digital Displacement Sensors SC-HG1-C User's Manual
CC-Link IE Field Communication Unit for SC-HG1-CEF User's Manual
Contact-Type Digital Displacement Sensor HG-S Series User's Manual
1.6.
Precaution
Before use, be sure to read the User's Manuals of the products you are going to use.
→ Module parameter
Basic setting → Link refresh setting
Figure 1.4.3-1: Link refresh setting examples
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
11/184
WUME-SCHG1IQRFB-1
Advertisement
Table of Contents
