Panasonic SC-HG1 Series Reference Manual page 131

Labels To Be Used
■ Input labels
Name
Execution Command
CC-Link IE Field flag
Start I/O No.
Station No.
Set Eco Mode
Reset Flag
Variable name Data type
i_bEN Bit
i_bIeFieldFlag Bit
Word
i_uStartIONo
[Unsigned]
Word
i_uStationNo
[Unsigned]
i_bEcoModeSet Bit
i_bReset Bit
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Valid range
ON, OFF
ON, OFF
Depends on the range of
the number of input/output
points of the target CPU
module. For more
information, refer to the
CPU User's Manual.
1 to 64 (in decimal) when
CC-Link IE Field Flag
(i_bIeFieldFlag) is OFF
1 to 120 (in decimal) when
CC-Link IE Field Flag
(i_bIeFieldFlag) is ON
ON, OFF
ON, OFF
131/184
Description
Turn ON this label to start the FB. You
can exit from the FB by turning it from
ON to OFF.
Turn ON Execution Command (i_bEN)
with this flag OFF to start the FB on
SC-HG1-C or with this flag ON to start
the FB on SC-HG1-CEF.
Specify in hexadecimal the number of
the starting I/O where the target
CC-Link/CC-Link IE Field
master/local module is installed. (For
example, specify H0A0 if the starting
I/O No. is 00A0.)
Specify the station number of the
communication unit you want to
configure.
If you turn Reset Flag (i_bReset) from
OFF to ON and execute this FB, it sets
the Eco mode.
Execute this FB with this label ON to
turn off the keylock and Eco mode.
Execute this FB with this label OFF to
turn on the keylock and set the Eco
mode in accordance with the value of
Set Eco Mode (i_bEcoModeSet) .
WUME-SCHG1IQRFB-1