Panasonic SC-HG1 Series Reference Manual page 16

Labels To Be Used
■ Input labels
Name
Execution Command
CC-Link IE Field flag
Start I/O No.
Station No.
■ Output labels
Name
Execution Status
Normal Completion
Error Completion
Error Code
Variable name
i_bEN Bit
i_bIeFieldFlag Bit
Word
i_uStartIONo
[Unsigned]
Word
i_uStationNo
[Unsigned]
Variable name
o_bENO
o_bOK
o_bErr
o_uErrId
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Data type Valid range
ON, OFF
ON, OFF
Depends on the range of
the number of input/output
points of the target CPU
module. For more
information, refer to the
CPU User's Manual.
1 to 64 (decimal)
Data type Default
Bit OFF
Bit OFF
Bit OFF
Word
0
[Unsigned]
16/184
Description
Turn ON this label to start the
FB. You can exit from the FB by
turning it from ON to OFF.
Turn ON Execution Command
(i_bEN) with this flag OFF to
start the FB on SC-HG1-C or
with this flag ON to start the FB
on SC-HG1-CEF.
To execute this FB, turn OFF this
flag.
Specify in hexadecimal the
number of the starting I/O where
the target CC-Link master/local
module is installed. (For
example, specify H0A0 if the
starting I/O No. is 00A0.)
Specify the station number of the
communication unit you want to
configure.
Description
Stays ON while the FB is running.
Turns ON upon normal completion of the FB.
Turns ON upon error completion of the FB.
Stores the error code that occurred in the FB.
WUME-SCHG1IQRFB-1